Graftobian's Airbrush Cleaning Kit comes with everything you need to keep your airbrush gun clean and in great working order.
This Airbrush Cleaning Bundle includes:
--8 oz Airbrush Cleansing Fluid
--1/4 oz makeup remover
--Airbrush Cleaning Brush Set
--Jar for soaking airbrush gun overnight
--#4 Round Brush
Airbrush Cleaning Kit instructions
Use these tools with airbrush cleaning fluid to keep your airbrush gun spraying smoothly.
Round #4 brush: Your standard cleaning brush. Dip in cleaning fluid to
clean the cup area, nose cone, needle cap, and nozzle
Magnifying loupe: Makeup loves to hide and small specks matter! Use the
loupe to check for tiny clogs in the nozzle or elsewhere in the gun.
Also works well for inspecting the gun nozzle for dents and the needle
for burrs or a bent tip. All of these things can affect the performance
of your airbrush gun.
• Soaking jar: Fill with 1 inch of cleaning fluid and soak gun tip down to loosen any dried makeup
5-brush set: The scrubbing brushes! After removing the needle cap, nose
cone and nozzle, use the smallest of these brushes, dipped in cleaning
fluid, to scrub caked-on makeup from the inside on the gun. With a
little work, these can remove the toughest dried on makeup from
otherwise impossible-to-clean places.
• Lubricating fluid (makeup remover): Rub on the needle for smooth operation.
How to clean a badly clogged gun
are, by far, the most common source of airbrush gun malfunctions. A gun
does not need to be caked solid with makeup to be clogged either.
There is very little room around the airbrush needle, and any little bit
of dried makeup that sticks in the tube surrounding it can drastically
affect the performance of the gun. If your gun is sputtering badly or
not spraying at all, follow these steps to remove the dried makeup and
get your gun working properly again.
• Disassemble the gun.
Remove the nozzle caps, assembly, and nozzle itself. Pull the needle out
of the back, taking care not to bend the tip.
• Use airbrush cleaner and the brushes provided to scrub the dried makeup out of the cup, nozzle, barrel, and anywhere else.
To loosen stubborn makeup, soak the gun tip down in the soaking jar for
a couple hours, or overnight. Continue scrubbing until the brushes are
coming out clean.
• Repeat these processes until you can look
straight thru the tiny nozzle and the gun barrel and see light on the
other side in a nice round circle. Make sure all the fluid is out as
this can obscure the view. Once this is accomplished, the gun is clean
and can be reassembled. Use the magnifier as needed.
• Lubricate the needle and reassemble the gun, taking care not to damage the needle tip.